Use the art of decoupage to enhance the beauty of your gourd
art.
| 4 oz bottle |
$4.75 |
| CA residents add 7.75% sales tax |
|
Decoupage
Plus
Decoupage is an art form originating in the 17th century. Master
artists in Italy imitated Oriental lacquer furniture by enhancing
prints and fixing them to furniture. They were then shellacked.
England and France copied the form and made beautiful works of
art. There has been a resurgence of interest in the art of decoupage
throughout the world.
JW etc's Decoupage Plus allows the artist to create a work of
art by sealing and adhering an image or images onto almost any
kind of surface . Decoupage Plus can be painted on, sponged on,
or layered with additional artistic work. When dried covering the
work with a depth of varnish allows the composition to glow through.
Each artist develops his/her own style. These are not pictures
that are just stuck on with Decoupage Plus, but, with little effort,
can become works of art.
Decoupage Plus differs from most decoupage products because it
is thick and yet gives plenty of time to work with the image before
it dries. It is clear and if brushed on, doesn't leave brush strokes.
The consistency lets you work with many textures, from napkins
to heavy fabrics.
|
Tips
for using Decoupage Plus
- Sand
project to be decoupaged smooth, fill any spots with
J.W. etc. Wood Filler
- Paint
or stain project to be decoupaged.
- Seal
both sides of image with Decoupage Plus, let dry.
- Paint
or stain project to be decoupaged.
- With
fine scissors cut out image to be decoupaged.
- Place
image on project to find correct placement before wetting
the image again.
- Brush
Decoupage Plus on back of image and place on project.
- Press
out any bubbles or wrinkles with a brush or roller.
- Brush
Decoupage Plus on top of image to keep the image from
curling, then let dry.
- Apply
another coat of Decoupage Plus to build up the surface,
let dry.
- Sand
lightly with a very fine sand paper
Remove Dust
- Varnish
project with Right Step. Apply as many coats as you desire
to get the wanted effect.
- If
desired, wax with Finishing Wax to finish off project.
|